DRP-240 PFC function din rial power supply

Advantage

> Clean production environment

> Full automatic testing with various tests

> Standardized production process with trained workers

> Low failure ratio and 24-month warranty

> Strong R&D and engineering support

Request a Quote

Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
With PFC Function
100% full load burn-in test
2years warranty

Model		DRP-240-24	DRP-240-48
	DC voltage	24V	48V
output	Current range	0~10A	0~5A
	Rated power	240W	240W
	Ripple&noise	80mvp-p	150mvp-p
	DCvoltage ADJ.range	±10%	±10%
	Voltage range	86-264VAC 120-370VDC ,47-63Hz
	Efficiency	84%	85%
	Inrush current	Cold start current 0.65A/400VAC 0.6A/500VAC
	Over load	105%~150% cut off the output,automatic recovery
	Over voltage	120%-140% shut down O/P voltage, re-power on to recover
environment	Working temperature	-10°C~+50°C
safety	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1minute
safety	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
others	Dimension	125.5125.5100mm (LWH)
others	Weight/packing	1.2kg/12pcs/15kg/41.527.525cm
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.